MOTUL 7100 4T 10W-30 Full-Synthetic Engine Oil

MOTUL 7100 4T 10W-30 Full-Synthetic Engine Oil High Performance Motorcycle Lubricant 100% Synthetic – Ester TYPE OF USE High performance bikes, sports bikes, street & road bikes, trails, off road bikes, enduro, trial…fitted with 4 stroke engines, integrated gearbox or not, wet or dry clutch, engines meeting Euro 2 or Euro 3 emission regulation, fitted with exhaust gas after treatment systems : catalytic converters, air injection into exhaust pipe... Recommended for specific HONDA, YAMAHA engines requiring SAE 10W-30 viscosity grade oil. Other uses: street bikes without catalytic converters, scooters, ATV’s, UTV’s… PERFORMANCE STANDARDS API SN / SM / SL / SJ / SH / SG SPECIFICATION JASO MA2 under N° M033MOT116 Protection Ester Technology: - Low traction coefficient Ester to minimize engine internal friction losses and improve performance - Synergy of Ester with anti-wear additives and improved shear resistance for improved gear protection and life time. 100% Synthetic lubricant for improved oil film resistance at high temperatures and high revs. Optimized Phosphorus and Sulphur content (JASO MA2 < 1200 ppm) for better operating conditions of catalytic converters. The innovative anti-wear additives package provides outstanding gearbox protection. FZG Gear Test results: Pass FLS>14. The FZG (Forschungsstelle für Zahnrader und Getriebebau) Test, evaluates fluid lubricating and wear protection properties at the interface of a loaded set of gears. Lubricants are then graded based on their “Failure Load Stage” or FLS rating from FLS 1 (very poor result) up to FLS 14 (outstanding result). Comfort JASO has created its own 4-stroke motorcycle standard -JASO T903- which has three grades MA, MA1 and MA2. JASO MA2 offers the most efficient friction levels to guarantee the clutch engagement during the three riding modes: Starting, Acceleration and Constant Speed. RECOMMENDATIONS Drain interval: according to manufacturers’ recommendations and tune to your own use. Can be mixed with synthetic or mineral lubricants. PROPERTIES Color Visual Red Viscosity grade SAE J 300 10W-30 Density at 20°C (68°F) ASTM D1298 0.859 Viscosity at 40°C (104°F) ASTM D445 73.7 mm²/s Viscosity at 100°C (212°F) ASTM D445 11.4 mm²/s Viscosity Index ASTM D2270 147 Pour point ASTM D97 -33°C / -27.4°F Flash point ASTM D92 228°C / 442.4°F TBN ASTM D2896 8.4 mg KOH/g   Official Link: https://www.motul.com/en-US/products/16501?id=16501&product=MOTUL+7100+10W-30+4T 300v: https://gearsfirst.in/shop/lubricants-oils/engine-oil/motul-300v-factory-line-ester-core-fully-synthetic-10w-40-petrol-engine-oil-for-bikes-1-l/